| Picture |
Heading |
Updated |
 |
PTFE Compression Packing Pure PTFE Packing With Oil Or Without PTFE Gland Packing
Description Braided from pure expanded PTFE yarn, provides a low friction finish and prevents leakage through the braid. It is most useful in slower shaft speed applications. Applicable for seal packing of valves, vessels and pumps of corrosive medium in |
2017-12-21 |
 |
NBR / EPDM / Neoprene Rubber Sheet
Rubber Sheet Rubber is a soft gasket material. A wide range of elastomers can be used, such as neoprene, nitrile, EPDM and natural rubber. Rubber sheet are used in a wide range of applications such as pipe gaskets, heat exchangers, and manways. |
2017-12-09 |
 |
Pure Flexible Graphite Sheet/tape
Pure graphite sheets / rolls are made from natural high-purity flake graphite through chemical and high temperature treatment, molding or rolling without any adhesives. With long life and low maintenance costs, it is still of excellent sealing performance |
2017-12-06 |
 |
Graphite Packing Reinforced By Wire
Description braided from low sulphur flexible graphite yarns, which are reinforced by metal wire or non-metallic fibers. With very low friction, it does not damage shafts or stems. It also shows good thermal conductivity, chemical resistance and high elas |
2017-12-02 |
 |
Double Jacketed Gaskets With Bars
Metal jacketed gasket, filled with the flexible graphite, ceramic fiber, asbestos and non-asbestos sheets as well as packed with the metal plates of stainless steel, tinplate, and red copper, is especially suitable for high temperature and high pressure s |
2017-12-01 |
 |
ASME/EN/JIS Spiral Wound Gaskets
Spiral Wound Gasket Spiral Wound Gasket Characteristic Spiral wound gaskets are to be constructed as alternate plies of preformed metal windings and plain fillers that are spirally wound when compressed between two flanges. A v and w shaped crown centered |
2017-11-24 |
 |
Oil And Acid Resistant Compressed Non-asbestos Fiber Sheet
The sheet, adopting the aramid fiber and high-quality sepiolite as the main reinforcing materials, is compressed with natural rubber, styrene-butadiene rubber and oil-proof rubber as adhesives. Applications: it is applied as sealing gasket material at equ |
2017-11-22 |
 |
Skived Or Moulded Virgin PTFE Sheet
PTFE ( polytetrafluorethylen ) – is fluoropolymer with excellent characteristics. · High continual temperature resistance until 250°C (for a short time 280°C), temperature degradation start at about 350°C · Good frost resistance until –200°C (PTFE foil ar |
2017-11-02 |
Friends links